
As temperatures drop and daylight hours get shorter, winter brings a fresh set of challenges for UK workplaces. Icy walkways, slippery floors, poor visibility and freezing temperatures can all increase the risk of workplace accidents.
Whether you manage a construction site, warehouse, factory or outdoor working environment, preparing for winter isn't just about keeping employees warm. It's about making sure your workplace, equipment and protective clothing are ready for the conditions ahead.
A little preparation now can help prevent accidents, minimise disruption and keep employees comfortable and protected throughout the colder months.
Here are seven essential checks to help keep your workplace safe this winter.
1. Check outdoor walkways and access routes
Frost, ice and snow can quickly turn normally safe walkways into serious slip hazards. Pay particular attention to site entrances, steps, ramps, pedestrian routes, loading bays and frequently used access points.
Before temperatures begin to fall significantly, check that suitable arrangements are in place for clearing snow and treating icy surfaces.
Consider the following:
- Identify areas that are particularly vulnerable to freezing.
- Make sure grit bins are stocked and accessible.
- Establish who is responsible for gritting and snow clearance.
- Use appropriate warning signs where surfaces remain slippery.
- Check walkways regularly during periods of freezing weather.
Remember that shaded areas can remain icy long after other surfaces have thawed.
2. Make sure employees have suitable safety footwear
The right safety footwear becomes especially important during winter. Wet floors, muddy ground, fallen leaves, frost and ice can all increase the risk of slips and falls.
Standard safety boots may provide essential toe protection, but it's also important to consider the grip and suitability of the sole for the working environment.
When reviewing workplace footwear, consider:
- Slip resistance appropriate to the working conditions.
- Waterproof materials for outdoor and wet environments.
- Good ankle support and a secure fit.
- Suitable protection against workplace-specific hazards.
- Regular checks for worn or damaged soles.
It's worth remembering that no safety boot can guarantee grip on every icy surface. Good housekeeping and appropriate winter maintenance remain essential.
Take a look at our range of safety footwear to help find suitable protection for different working environments.
3. Improve visibility during darker working hours
With daylight disappearing earlier, many employees will be starting or finishing work in low-light conditions. This can create additional risks, particularly around moving vehicles, delivery areas, machinery and pedestrian routes.
Check that outdoor lighting is working correctly and provides adequate illumination across walkways, entrances and working areas.
High-visibility clothing is equally important. Make sure employees have suitable garments for their working environment and that reflective elements remain clean and in good condition.
Practical checks include:
- Inspecting site lighting and replacing faulty lamps.
- Checking vehicle and pedestrian segregation.
- Ensuring high-visibility clothing is suitable for the required level of protection.
- Keeping reflective surfaces clean and unobstructed.
- Reviewing lighting around entrances, car parks and loading areas.
Good visibility helps drivers, machinery operators and pedestrians identify potential hazards earlier.
4. Take extra care with wet and slippery indoor floors
Winter slip hazards aren't restricted to outdoor areas. Rainwater, mud, snow and grit can easily be carried inside on footwear, creating slippery floors in reception areas, corridors, warehouses and staff entrances.
Effective cleaning routines and suitable floorcare equipment can make a real difference.
Consider introducing or reviewing:
- Entrance matting to capture water and dirt.
- Regular floor inspections, particularly around entrances.
- Suitable cleaning equipment and products.
- Prompt removal of spills and standing water.
- Wet floor warning signs during cleaning.
Pay particular attention to busy entrances where large numbers of employees, visitors and delivery drivers may be passing through.
Keeping floors clean and dry is a simple but important part of winter workplace safety.
5. Review winter workwear and protective equipment
Working in cold, wet and windy conditions can affect employee comfort, concentration and ability to carry out tasks safely.
Appropriate workwear should provide protection against the conditions employees are likely to encounter without restricting movement or interfering with other PPE.
Depending on the working environment, winter clothing may include:
- Thermal base layers to help retain body heat.
- Insulated fleeces and mid-layers.
- Waterproof and wind-resistant jackets.
- Waterproof work trousers.
- Suitable thermal and protective gloves.
- Warm headwear compatible with required head protection.
Layering is often a practical approach, allowing employees to adjust their clothing as temperatures and activity levels change.
Employers should also consider whether existing PPE remains suitable when worn with additional winter clothing.
For more advice, see our guide to winter workwear and layering.
6. Inspect outdoor equipment and working areas
Cold temperatures, heavy rain, strong winds and freezing conditions can all affect workplace equipment and outdoor working areas.
A winter inspection should identify anything that could become unsafe as weather conditions deteriorate.
Check:
- Ladders, steps and access equipment for damage or slippery surfaces.
- Temporary walkways and platforms for water accumulation or ice.
- Outdoor electrical equipment and cables for damage or exposure.
- Site lighting and electrical connections.
- Drainage systems to help prevent standing water and flooding.
- Equipment stored outdoors for signs of weather damage.
Particular care should be taken with ladders and elevated working areas, as frost, ice and wet conditions can significantly increase the risk of falls.
Where conditions make work unsafe, activities should be stopped until appropriate control measures are in place.
7. Brief employees and review winter safety procedures
Even the best equipment and workplace preparations are only effective if employees understand the risks and know what to do.
Before winter conditions become more severe, take time to remind staff about potential hazards and review relevant workplace procedures.
Make sure employees know:
- How to report icy or slippery surfaces.
- Who is responsible for gritting and snow clearance.
- What to do if weather conditions become unsafe.
- Where to find suitable winter PPE.
- How to recognise signs of cold-related illness.
- How to access first aid and emergency assistance.
Regular reminders and toolbox talks can help keep winter safety at the forefront of everyone's mind.
Encourage employees to report hazards as soon as they notice them rather than waiting for scheduled inspections.
Be prepared before winter weather arrives
Winter workplace safety is about more than simply providing warm clothing. It's about identifying potential hazards, maintaining safe working environments and making sure employees have the right equipment and information to work safely.
By checking walkways, reviewing footwear, improving visibility and preparing suitable PPE, employers can take practical steps to reduce winter-related risks.
Don't wait until the first frost to start preparing. A few straightforward checks now can make a significant difference throughout the winter months.
Looking for workplace safety equipment and protective clothing? Explore the range available from PK Safety to help keep your workplace prepared all year round.